Zenith 2400 is a 2-channel 1000W @ 4 Ohm professional audio amplifier, with switching power supply, built in a 2-rack unit metal enclosure. It has balanced inputs in XLR3 format and 1/4" TRS jack and outputs with XLN4 and Binding Spot connectors. It has selectors for input sensitivity, operating mode and bass boost. It also has protection systems against short circuit, temperature, DC, VHF and constant high frequency signal The front panel has a power switch, independent volume controls for each channel and indicators for power, signal, clip, protection and operating mode.
Type | Class 2H |
W/Ch @ 8/4/2 Ohm | 600 W / 1000 W / 1250 W |
W/Ch @ 8/4 Ohm Bridge | 2000 W / 2600 W |
Frequency Range | 20 Hz - 20 Hz |
THD+N | <0.05% |
S/N Rate | >100 dB |
Damping Factor | >200 |
Dynamic Range | >80 dB |
Gain | 26/32 dB |
Input Impedance | 20 KOhm balanced, 10 KOhm unbalanced. |
Input Sensitvity | 13 dBu / 6.97 dBu |
Connections | Power supply: 1 x male schucko included, Audio input: 2 x XLR3 female, 2 x 1/4" TRS Jack. Amp output: 2 x XLN4 female, 4 x Binding Post. |
Protections | Overheat, VHF, short circuit, AC lower, DC protection, CLIP / Limit |
Length(m) | Width(m) | Height(m) | Weight(kg) | |
---|---|---|---|---|
Product | 0.36 | 0.48 | 0.09 | 9.90 |
Box | 0.50 | 0.58 | 0.16 | 11.00 |
Manual | ZENITH SERIES - USER MANUAL | Download | |
Datasheet | ZENITH SERIES - FICHA TÉCNICA | Download | |
Datasheet | ZENITH SERIES - DATASHEET | Download |