Next Login
Audio Installation
PA 4100
82MEG410
8Ohm
L100V
Amplifier / mixer 4 x 250 W @ 8 Ohm, L25 / 70 / 100V
Perfect for almost any type of installation, the PA 4100 incorporates 4 outputs of 250 W R.M.S. independent. Each output has independent volume and tone controls. PA 4100 supports both low and high impedance loads. The 4 inputs with volume control can be independently configured as mic or line with selectable + 48V phantom power, phase shift switch and high pass filter all on each channel via microswitches. The first mic input contains a selectable priority circuit. Additionally, 2 auxiliaries, a chime, a siren, and a phone line join the mix.
Features
- 4 independent zones.
- Phantom power + 48V.
- Mixer 4 channels mic + 2 aux.
- 3 HU rack 19 inch.
| Type | Low impedance (4.8 Ohm), Line 25/70/100 V |
| Power | 4 x 250 W |
| Input Sensitvity | Micro: 2.8 mV; Aux: 316 mV; Line: 3 KOhm; Tel: 178 mV |
| Input Impedance | Micro: 600 Ohm; Aux: 50 KOhm; Line:3 KOhm; Tel: 600 Ohm |
| Frequency Response | Micro: 50 Hz - 9 KHz; Aux: 50 Hz - 18 KHz; Line: 50 Hz - 10 KHz; Tel: 100 Hz - 3 KHz |
| THD+N | < 1 % @ 1 KHz |
| S/N ratio | Micro: > 70 dB; Aux: > 80 dB; Line: > 80 dB |
| Connectors | Micro: XLR3, euroblock; Aux: 1 x RCA; Line: 1/4 "Jack; Tel: Terminals; Amp out: Terminals |
| Controls | Volume and tone control per channel, mixer 4 mics + 2 aux, 2 tones "Ding, dong", Alarm |
| Phantom Power | +48 V |
| Other functions | 2 tones (? Ding-dong? Pre-announcement), polarity reversal, high pass filter (300 Hz), tel / emer / input 1 priority |
| Power supply | AC 115/230V, 50/60 Hz ±10% |
| Consumption | 1800 W |
| Dimensions | 483 x 132 x 410 mm |
| Weight | 25.2 Kg |
| Length(m) | Width(m) | Height(m) | Weight(kg) | |
|---|---|---|---|---|
| Product | 0.41 | 0.48 | 0.13 | 25.20 |
| Box | 0.65 | 0.28 | 0.65 | 28.60 |
