To be discontinued

DCA 1

51DCA001

DCA 1 is a versatile mixing amplifier with digital audio matrix (8in-2out). It can be remotely controlled from a third party controller (RS 232/485 via ASCII or DMX).

It features two amplified output zones (120 W RMS per channel) and eight mono inputs. Thanks to its microprocessor, it is possible to set up a digital matrix-mixer and control each zone independently or be used as a 2 zone amplifier with remote control input and volume.

Thanks to the RS 485 port, it is possible to use 4 DMX channels to set up the output gain and select the audio source of each output. This all-in-one solution is especially adapted to installations like restaurants or small shops, taking into account that it can be easily integrated itself into an existing network managed by a third-party controller.

Number of input channels: 1 Mic/Line (mono) + 7 Line (mono).
Number of output channels: 2 powered + monitor.
Line inputs sensitivity: 775 mV / 0 dBu.
Mic input sensitivity: 7.7 mV / -40 dBu.
Input impedance: 20 kohm.
Frequency response: 20 Hz - 20 kHz.
S/N ratio: > 96 dB.
THD+N: <0.01%.
Protections: Overheat, short circuit, DC protection, CLIP.
Output power: 2 x 120 W RMS (4 ohm).
Connectivity: RS232/RS485-DMX.
DMX channels: 4.
Display: Blue backlight 2x16 alphanumeric LCD.
Rear panel connectors: 4 x RCA double (line inputs), 1x XLR3(mic input), 3x Euroblock_3 pin(connectivity), 2 x euroblock_2 pin (powered output), 1x RCA double (monitor output), 1x IEC (Main supply).
Front panel controls: 1x Encoders (Variation,Navigation), 4 x push switch (direct input selection).
Indicators: LCD display, 4 x green led (direct selection), 6 x led (power amplifier status).
Main supply: AC 120 or 240 V, 60/50 Hz.
Power consumption: 250 W.
Dimensions (WxHxD): 483 x 44 x 262 mm.
Weight: 2.5 kg.
Mixing amplifier with digital audio matrix (8 in / 2 out).
2 independent zones (120 W RMS per zone).
8 mono inputs, one of them with selectable mic priority.
4 DMX channels to set up the output gain and select the audio source of each output.
Full integration in existing networks managed by a third-party controller (RS 232/485 via ASCII or DMX).
Additional output available for monitor (Line).
Large LCD display and controls available on front panel.
Password protection to avoid unwanted handling.
  Manual
Download
  Manual
Download
  Software
Download
  Datasheet
Download
  Datasheet
Download

So far, there are no questions related to this product.


Register to be able to ask a question about this product.

I accept terms and conditions regarding the treatment of my data.Make the question

 


Related Products

  • MK 40
    Signal cable. 2 RCA male - 2 RCA male. 3m
  • NEO 5
    Passive loudspeaker 40 W @ 8 Ohm, 16/8/4/2 W @ L100V. 5.25'' Woofer + 0.5'' Tweeter. Sold in pairs.
  • RACKTOUR 4
    Racks for transport

Alternative Products

  • M 450
    2 x 220 W @ 4 Ohm power amplifier. Stereo/bridge mode.
  • MMP 10 AT
    Amplifier with MP3 and FM radio player. 2 x 100 W @ 4 Ohm. USB/SD/BT. MIC+AUX+LINE. Remote control.
  • MMX 62
    Analog audio mixer. 6 mic/line ch + 3 mic/line st. Phantom. Talkover function. 1 HU 19''.
This website uses cookies

Cookies on this website are used to personalize content and advertisements, provide social media features, and analyze traffic. In addition, we share information about your use of the website with our social media, advertising and web analytics partners, who may combine it with other information that you have provided to them or that they have collected from your use of their services. < / p> Only use necessary cookies Select cookies Allow all cookies More info