The CMU conference system is an easy but effective system for installations where is not required a big complexity and, above all,the most important thing is the simplicity of the installation and a good performance on the signal addition and priority settlement.
CMU 100 is the main unit of the conference system, which supplies power to all the elements. There are also available audio andcommutation controls: on the front panel users can find controls for headphones, aux. inputs and microphones. It includes a balanced XLR output and an unbalanced RCA Rec output. In addition, it has a Limit switch control to limit the number of openmicrophones at the same time (1, 3 or 6) even allowing to turn them off automatically.
WCM 10 D: This microphone is equipped with a speaker and a cardioid electret microphone. To prevent feedbacks, the speaker turns off while the microphone is used. A red light is available to indicate to the other participants which microphone is active. Cable KCM 2 included.
WCM 10 C: This microphone is designed for the person who leads the reunions. It has the same functions as the delegated microphone, but it also includes a priority button, in order to turn off all the delegated microphones.
WCM 10 D and WCM 10 C are not included with the CMU 100 system, they are sold separately.
Frequency Range | 50 Hz - 16 KHz |
S/N ratio | > 81 dB |
Sensitivity | -15 dB |
Controls | Power switch, Headphone volume, Auxiliary input volume, Microphone volume, Active mic number limitation selector |
Connections | Power supply: IEC, Headphones: 1/4" female TRS jack, 2 DIN 8 connections for microphone system, Recording output: 2 x RCA female, Balanced output: 1 x XLR3 male, Auxiliary input: 2 x RCA female |
Power supply | AC 230V 50/60 Hz |
Dimensions | 483 x 60 x 205 mm |
Length(m) | Width(m) | Height(m) | Weight(kg) | |
---|---|---|---|---|
Product | 0.21 | 0.48 | 0.06 | 4.50 |
Box | 0.50 | 0.29 | 0.12 | 4.50 |
Manual | CONFERENCE Series 100 - Manual v.1.3 | Download |