Work PRO launches a new series of amplifiers, PA 100 and PA 100 MX, designed to control the audio in small installation as offices, hotels room... Its small size, 100Watts of power (50W per channel) and more features show a good option to be choosed.
PA 100 is a 100 V amplifier, 50W @ 8ohm per channel or 100W if it works in bridge mode, with a line input in its rear part, where also the user can connect the device using a RJ45 port and using RS-485 protocol to control and send to it commands and signals via software/other devices, or a RCA inputs to connect auxiliary audio signals to it.
Also the PA 100 in its rear panel offers a switch with 4 binary positions to make able to choose the output impedance between 8/16? or 70/100V and the necessary 4 screws to connect the speakers. In the front panel the user will find the power switch, the main volume control knob and two leds to check the signal input and the peak of it.
PA 100 MX is the evolution of the PA100, but with a pre-amplifier for microphone inputs and keeping some of the audio features as the 50 W per channels at 8ohm of power or 70/100V for line installations.
In the rear panel of the unity the user can find every necessary connection to work with it, as RJ45 connector to control the device via software or others devices. Also a slot with 10 switches, that ables control 3 anti-feedback presets in mic input (for that annoying high sound when the microphone is close to the speakers), control the microphone gain between (+6, +10 or +15dB) or make louder the microphone signal over the music background, also is possible select the output between mono and stereo.
There are three RCA connections, two of them are inputs and one as output to link the signal. An euroblock input connection for the microphone signal, that can be adjust in gain easily using the knob. In the front panel the user can control different parameters of the signals as the level of the microphone, choose the signal inputs from a switch, the main volume orcontrol tone (bass and treble) in the equalization.
The user can connect an external device using the jack connection in the front panel and check the font and level of signal thanks to the led that the PA 100 MX incorporates.