PA 100 MX

Installed sound amplifier with mixer

PA 100 MX is an amplifier with switching power. It incorporates 3 LINE inputs (2 rear + 1 fronT with selector and its own volume control, two tone controls and LEDs which mark the signal presence and clip.

Additionally, the amplifier incorporates microphone input, providing a mixing function and adding several features which set the system according to the installation requirements. The functions that can be set are:

MIC priority.
Mono/Stereo input mode
3 gain levels in MIC input
3 anti-feedback presets in MIC input

It can operate with low impedance or 70/100V line loudspeakers.

The operating mode is selected through a switch in the rear side and a dipswitch block which has some terminals reserved for future improvements.

In the rear side is also allocated a RJ45 connector which admits RS485 command from an external device in order to control some features.

Installed audio amplifier with mixer
Microphone gain setting
Stereo/mono switch mode
2 tone controls
LED signal and clip
Remote control by RS485 commands
Appropriate for 8 Ohm low impedance speakers and 70/100V line installations
THD+N: 1KHz, 15W, 8/16 <=0.1% 1KHz, 30W 70V/100V <=0.2%
Frequency response: 20 Hz - 20 KHz

Output Power: 2 x 50 W @ 8 Ohm / 100W (70/100V Line)
System output: 4/8/16 Ohm 100 V line
Inputs: 3 LINE (2 rear + 1 Front), 1 MIC, 1 RJ45 (RS485 commands).
Outputs: Terminals
Main Supply AC power: 110V - 240V, 50 Hz/60Hz (switching power)
Dimensions (WxHxD): 215 x 48 x 264 mm
Weight: 2.3 kg

Related Products

  • IC 500 T
  • MK 62
  • MKS 1400
  • NEO 6